In our daily life , it must have some staffs in household need to be organized. Therefore DIY shelving is a good choice for those things and it can improve your room space and make it very cleaning and neat.
Today we will teach you how to assemble or instruct a boltless shelving with MDF board.
Here we go. Rack components
MDF boards ,uprights , long shelf ,short shelf , support metal angel brackets ,upright connectors, plastic feet
What you need to build up your shelving with a rubber hammer screwdriver for expanding wall plugs, flathead screwdriver to attach supports under shelves , drill bit , screws min, 5mm*45mm , expanding wall plugs,(suitable type for the wall material) ,protective gloves .
One adult person are able to assemble this shelving in 15 minutes. Can’t you believe it. It is true. We firstly get posts, long and short shelf support beams ,decking for each level supports. then lay two posts parallel each other to the flooring, connect the posts with 2short beams at the top and bottom levels, make sure of the lip should be faced inward ,slide the connector into the holes on the post gently. Join the other set of posts with 2 short beams attaching the long beam to another post .Remaining beams to the top and bottom levels, joint the lips upward, add beams to create additional shelves, place the decking on the shelves ,and there you go. One bay or one column shelving is setting up quickly. Last we put on the plastic feet on each posts top and bottom, which will protect the flooring from scratching. If you need more bays ,just repeat the previous steps for the add-on bays. After listening to my explanation, don’t you think it’s very simple? Do you want to install a set yourself?
Do not hesitate to contact us for any needs.